Join us and do the right thing to get mountain top!

1. Establish and maintain the statistical reporting system of product conformance;
2. Supervised the internal audit process;
3. Establish and maintain the quality system of the company;
4. Implement the company's quality system management regulations;
5. Organize internal quality system, formulate annual audit plan, implement and follow up;
6. Organize internal management review, formulate and follow up measures;
7. Organized and coordinated the second party and third party to review, guide and coordinate the quality system management of other departments;
8. Guided and coordinated the quality system management of other departments;
9. Internal document management;
10. Assisted the department in attendance, weekly and monthly reports, etc.
11. Understand and comply with all quality standards and guidelines and comply with safety, health and environmental regulations;
12. Complete other tasks assigned by superiors.

1. Full-time college degree or above;
2. Familiar with IATF16949 standard, proficient in the use of quality tools, IATF16949 internal auditor certificate;
3. At least 5 years and 3 years experience in quality management system, working experience in automotive field is preferred;
4. Good language skills, English is preferred;
5. Strong sense of responsibility and team spirit.

 1. Responsible for machining primary processing units, cleaning, deburring and other processes; Responsible for machining quality analysis in the early stage of the project; Support problem analysis of other processes;
2. Responsible for the preliminary sample production of the above processes (responsible for the operation mechanism);
3. Responsible for pre-process analysis, quotation and planning of the above processes; Process development and implementation, including process scheduling, equipment preparation, fixture, tool design, etc. Process verification. Responsible for process problem solving, continuous technical improvement and transformation;
4. Cooperate with the project development stage, support machining equipment selection, numerical control modeling, etc.;
5. Cooperate with the production workshop to constantly optimize the existing mass production projects, reduce costs and increase efficiency;
6. Completed the preparation of various process documents required in the early stage of the machining project;
7. Responsible for analyzing cycle time, production line layout, making work instructions, flow charts, PFMEA, etc.; Support quality to make control plan; Support production efficiency analysis and cost analysis; Develop lean and continuous improvement projects;
8. Support the development and establishment of new project equipment and production line engineering specifications;
9. Other tasks assigned by leaders.

1. College degree or above, major in mechanical, numerical control, material or related;
2. More than 10 years machining experience in auto parts or machinery industry, familiar with stainless steel small parts cutting; Strong hands-on ability;
3. Proficient in machining center, CNC lathe (deep hole drilling is preferred), cleaning, ECM and other processes; Familiar with CAD drawing, FANU, Siemens NC system programming, etc.
4. Independently responsible for the design and development of tooling, fixture and fixture, familiar with fixture principle; Familiar with tool selection;
5. Be responsible for and complete the project development process independently, and have the ability to write documents; Familiar with PFMEA, control plan, APQP;
6. Good English reading and writing;
7. Good communication skills and team spirit;
8. Accept to work overtime.

1. Manage, promote and implement the group production system (WPS) with a structured and strategic lean production standard based on WPS standards, and involve all departments in related activities;
2. Develop and deploy lean production-related policies and procedures with the group lean team, and implement them effectively;
3. Regularly report the implementation of WPS and share relevant experience within the group;
4. Coordinate with other departments to identify and implement lean/CIP projects, management activities and related resources;
5. Audit and supervise the implementation of WPS in all departments, and participate in problem solving, including manufacturing process and management bottlenecks and quality improvement, waste elimination, productivity and production efficiency improvement and reasonable delivery control;
6. Provide theoretical training related to lean production and build "lean culture" and continuous improvement activities required by all departments;
7. Develop templates or tools for efficient operations and continuous improvement projects;
8. Know and comply with all quality standards and guidelines and comply with safety, health and environmental regulations;
9. Complete other related tasks assigned by superiors.

1. Bachelor degree or above, major in mechanical design, manufacturing, automation or industrial engineering;
2. At least 8 years of lean production management experience in auto parts manufacturing enterprises;
3. Familiar with Lean /6 Sigma;
4. Excellent communication skills and team spirit;
5. Strong problem solving skills;
6. Good command of oral and written English and Mandarin.

1. Responsible for the specific implementation of production direct material procurement in the process of new project development, including inquiry, pricing application submission, purchase order release, etc.;
2. Responsible for introducing new suppliers according to the development requirements of new projects;
3. Effectively connected with other related departments in the process of new project development;
4. Responsible for the transfer, tracking and implementation of procurement requirements in the development of new projects within the company and the department;
5. Responsible for the tracking and management of relevant suppliers in the process of new project development;
6. Responsible for annual price negotiations with suppliers;
7. Responsible for achieving the annual cost reduction target;
8. Complete other tasks assigned by superiors.

1. Bachelor degree or above, major in science and technology;
2.5 years or above direct material and project procurement experience in auto parts industry;
3. Good communication skills, price analysis and negotiation skills;
4. Have good professional ethics, strict working standards, positive, serious and responsible working attitude;
5. Can adapt to certain business trips and working pressure.

According to the company's training plan for technical reserve talents, they will be arranged to practice in relevant departments of the company's technology center since their entry.
Including but not limited to: project management, product development, process development, tooling design and production, intelligent equipment and other departments.
After job rotation training, determine the final specific technical position by combining the advantages, willingness of the new employee and the company's needs.

1. 2022 Outstanding graduate of Bachelor's or Master's degree in machinery, metal materials, material forming, vehicle engineering and other related majors;
2. Internship experience related to technology in auto parts industry is preferred;
3. Aggressive, responsible, innovative and capable of solving problems, hard-working and able to bear certain working pressure;
4. Good at team cooperation, good communication and presentation skills;
5. Proficient in UG, CAD and other drawing software, and Office software;
6. Cet-4 or above.

 

1. Responsible for the repair and maintenance of machining equipment, analysis and improvement of frequent problems, and reduction of equipment failure rate;
2. Trained staff to use machining equipment correctly, trained staff to carry out primary maintenance and basic troubleshooting of equipment;
3. Optimize, improve and transform some equipment according to process requirements;
4. Put forward suggestions on integration of newly developed equipment and participate in equipment acceptance;
5. Guide and train maintenance personnel to complete complex equipment repair work;
6. Organize and back up the equipment data;
7. Other tasks assigned by leaders.

 
1. College degree or above, major in mechanical;
2. At least 5 years machining equipment maintenance experience;
3. Have the theoretical knowledge of machining equipment, master the necessary computer technology, automation principle, PLC programming, hydraulic technology, industrial control principle, etc.
4. Master the programming language of machining equipment; Familiar with machining equipment systems (Fanuc, Siemens, etc.);
5. Have strong and weak current knowledge, familiar with PLC, touch screen, servo, inverter, etc., have basic equipment management experience;
6. Good English reading ability;
7. Good logical analysis ability, good at summarizing experience, able to quickly find and solve problems;
8. Good teamwork spirit, willing to work overtime

 
1. Responsible for the processing technology of the company's automotive pipeline products, including but not limited to: setting and verification of on-site tubing process, parameter setting of tubing related equipment, review of tubing molds, etc.;
2. Responsible for the pipe fitting processing process design of the quoted project;
3. Responsible for the process design and development of the sample mold (upsetting head & bend); Including analysis of cycle time, production line layout, work instruction, flow chart, PFMEA, etc.;
4. Support quality control plan; Support production efficiency analysis and cost analysis; Develop and implement lean and continuous improvement projects;
5. Assisted in solving problems and failures in the production process of batch products; Cooperate with the tubing production workshop to optimize the existing mass production projects, reduce costs and increase efficiency; According to the quality and field feedback, to optimize the product process, carry out continuous improvement work, put forward reasonable suggestions;
6. Support the development and establishment of engineering specifications for equipment or production lines for new projects;
7. Other tasks assigned by superiors

 
1. Bachelor degree or above, major in machinery, numerical control, material or related;
2. More than 5 years working experience in oil pipe technology in automobile parts or machinery industry, familiar with the process flow of automobile pipeline;
3. Strong hands-on ability; Familiar with pier spinning, pipe bending, spinning and other related equipment;
4. Can independently take charge of and complete the project process development, and have the ability to write documents; Familiar with PFMEA, flow chart, WI, etc.
5. Familiar with UG, CAD and other drawing software; Good English reading and writing;
6. Good communication skills and team spirit, accept to work overtime.

1. Responsible for the development and quotation of molds for new projects;
2. Responsible for the process tracking of mold development;
3. Responsible for mold drawings to ensure their standardization, correctness and accuracy;
4. Responsible for making relevant process documents (process flow, FMEA, WI, time maintenance table, etc.);
5. Assisted in solving the problems and faults in the stamping process during production;
6. Responsible for tracking the use and production of unhanded molds;
7. Complete other tasks assigned by superiors.

 
1. Bachelor degree or above, major in mechanical, material, mold design or related;
2. More than 10 years working experience in cold stamping process and mold;
3. Familiar with the forming process of stainless steel materials, able to identify the causes of problems and provide solutions through abnormal parts;
4. Familiar with the structure of cold stamping die, able to design independently; Familiar with machining process and mechanical drawing;
5. Understand machining equipment such as turning, milling, planing and grinding; Understand mold parts processing flow;
6. Master AutoCAD, UG, OFFICE and other common design and OFFICE software.